Learn about the latest developments in the field of Electronic Article Surveillance as well as IP Security and find out how TAGIT is reinventing EM technology for your security landscape.

If you have additional questions, get in contact here.



TAGIT SA anti-theft systems are installed in SEPHORA, Brazil where they recently reviewed AM, RF & RFID, with the results that EM came out on top, despite the higher capital cost.
This was on the basis that all the high risk products are either small, or small and have foil packaging where AM, RF or RFID does not detect well.

There is also a big increase in theft using foil bags which shields all of those technologies, but not Tagit EM.


DA-MOOI van Frits chooses TAGIT 3D EM

MOOI Parfumerie DA - MOOI van Frits has opted for EM Market Leader Tagit in Bilthoven as EM is the only technology which has small labels which detect foil and metal packaging and still detect when placed in foil bags.

Thank you for this successful installation.



New lower cost label, which is slightly slimmer in width at 9.3mm v 10.8mm for standard AM labels. This allows us to add 20% labels in a sheet (126) and box (6000) and carton (24,000) reducing the storage and transportation cost. Detection performance is only 3 or 4% lower than standard AM labels and performs well in all AM systems in the market. The label is ideal for hand application in store.


New EM weigh-scale food label

The perfect way to protect all high-risk fresh foodproducts weighed and packaged in the store.
This weigh-scale label has embedded security, so there is no additional labor cost to apply labels. It can run and be be printed with any printer version. These labels are quick, easy to apply and low-cost while printing quality is obtained. Security tagging is not longer dependent on staff which can be unreliable and inconsistent.

Effective and affordable security

Effective and affordable security

Parfumerie Mooi van Koek in Soest has opted for her article security for our TAGIT Premium Light 3D EM antennas from BeSuRe Nederland.

Congratulations on your new store and this wonderful installation.



Piotr Heller from the German radio station "Deutschlandfunk" met Vladimir Manov to find out how TAGIT Security Paper is protecting Intellectual Property. Read article



Come and discover this secure paper solution on our stand at SECURITE LAUSANNE 2018 from 14. - 16. November 2018. Thank you to DUKASCOPY TV and the club SWISS CORPORATE ALLIANCE for this excellent capsule.

BeSuRe Nederland has installed Tagit Premium Light EM system for article security


In the renovated Beauty-X store in the Lange Voort shopping center, BeSuRe Nederland has installed Tagit Premium Light EM system for article security.

Secufence for IP Security


Secufence is designed for the protection of confidential documents with TAGIT Security Paper at high-tech companies and government institutions. Using the patented 3D detection with three coils it delivers the highest level of detection.

Test detection of Tagit EM systems in retail environments

Testing Detection

Miklós Holbis is showing how to test detection of Tagit EM systems in retail environments.

Protecting smallest items with ease

Protecting smallest items with ease

We have been asked about an EM version of a jewelry label.
TAGIT would like to present to you a Booster bag proved, reasonably priced EM solution - for jewelry and eyewear.
Using a 32mm Power label with a jewelry sticker is a perfect security solution for small items. Lucia from TAGIT will show you how.



Tagit have had an excellent response to the Tagit Partner meeting of customers from over 30 countries around the globe, including partners from the Far East, Africa, India, Middle East, South America, and Russia as well as all over Europe.


This calculator shows to you the comparison of Return of Investment of the different EAS technologies. It shows the advantages of Tagit EM, which are mainly used in  Cosmetic/pharmacy, bookstores, supermarkets and DIY.

The purpose to use EAS technology is to reduce loss caused by stealing, thus to increase profit/margin. The more efficient in loss prevention, the more money you can earn. Although EM system is most expensive, we should also look the other side, the Return of Investment.
How really investment will be returned and how evaluated technology really influences for losses? This calculator will help you to make the right choice.



Tagit is proud to present a complete range of EM EAS solutions that were all developed and manufactured under the strict supervision of the company.


Do TAGIT 3D EM systems detect with products covered in aluminium foil or in aluminium foil bags (booster bags) used to trick other EAS systems ?

Yes, they can detect more effectively than other technology can do, because the operation frequency is low.
Tagit labels work on metal, round surfaces and small objects. Even Booster-Bags will be detected. Watch how

Are TAGIT EM labels compatible with other EM systems ?

Tagit EM labels are compatible with all other EM systems, with the exception of Meto Systems, which require special Tagit labels in order to detect. For customers that have both Meto and other EM systems in place and wish to tag at DC or at the manufacturer special dual technology labels are provided which work on both types of systems.

Can Tagit 3D EM systems detect labels on metal objects ?

Tagit 3D Systems can detect on all metal objects with the only exception being metal which has been magnetised.

What Type of EM label do I need to apply on specific articles ?

In order to maximise detection the longer the label the better the detection is achieved. Therefore you would generally apply longer labels to larger products and shorter labels to smaller products. If the detection on smaller products still needs to improve you can also apply speciality high performance labels, like twin and power labels in order to boost the performance.

What ROI will I get with a Tagit 3D EM system ?

As you have the ability to be able to protect all of the high shrink items with Tagit 3D systems and labels you get a greater shrinkage reduction and therefore a much better ROI. Contact us to receive our ROI calculator by email.

Is there any products that I cannot protect with Tagit 3D system ?

The only products that cannot be protected are those that have magnetic properties. This makes the Tagit 3D system the most versatile on the market.

What systems nearby may cause environmental noise issues on the system ?

Some air conditioners, computers, special lights and Meto EM systems which are close to the Tagit 3D System. This is the same for most EAS Systems.

If there is a high level of environmental noise what can be done to improve performance ?

Ideally you would look to improve the noise environment, but if this is not possible the main benefit of the Tagit 3D System is that by using a Master-Master or Turbo configuration with sensors you have the ability to tune the system in order to maximise the performance.

What is the maximum aisle width I can have with Tagit EM systems ?

Tagit 3D EM Systems have the ability to detect labels up to 1.15m aisle width.

What do I need to do to maximise detection and/or aisle width ?

Detection can be maximised by using a master-master configuration, sometimes with Turbo and sensors, by using longer labels or by using speciality high performance labels.