The Eureka TAGIT 3D EM system is manufactured using high quality materials. Using its patented 3D detection and an installation distance of up to 110cm it produces high level detection in all three label orientations. The installation distance depends on the configuration and the on site electrical noise level. This system is designed for exit and cash desk protection of cosmetic stores, libraries, archives, book stores, pharmacies and groceries exported across the world.
Yes, they can detect more effectively than other technology can do, because the operation frequency is low.
Tagit labels work on metal, round surfaces and small objects. Even Booster-Bags will be detected. Watch how
Tagit EM labels are compatible with all other EM systems, with the exception of Meto Systems, which require special Tagit labels in order to detect. For customers that have both Meto and other EM systems in place and wish to tag at DC or at the manufacturer special dual technology labels are provided which work on both types of systems.
Tagit 3D Systems can detect on all metal objects with the only exception being metal which has been magnetised.
In order to maximise detection the longer the label the better the detection is achieved. Therefore you would generally apply longer labels to larger products and shorter labels to smaller products. If the detection on smaller products still needs to improve you can also apply speciality high performance labels, like twin and power labels in order to boost the performance.
As you have the ability to be able to protect all of the high shrink items with Tagit 3D systems and labels you get a greater shrinkage reduction and therefore a much better ROI. Contact us to receive our ROI calculator by email.
The only products that cannot be protected are those that have magnetic properties. This makes the Tagit 3D system the most versatile on the market.
Some air conditioners, computers, special lights and Meto EM systems which are close to the Tagit 3D System. This is the same for most EAS Systems.
Ideally you would look to improve the noise environment, but if this is not possible the main benefit of the Tagit 3D System is that by using a Master-Master or Turbo configuration with sensors you have the ability to tune the system in order to maximise the performance.
Tagit 3D EM Systems have the ability to detect labels up to 1.15m aisle width.
Detection can be maximised by using a master-master configuration, sometimes with Turbo and sensors, by using longer labels or by using speciality high performance labels.